Descrizione

PHONO PREAMPLIFIER
Input Impedance100 Ω (MC), 47 kΩ || 270 pF (MM)
RIAA Response (20 Hz to 20 kHz)± 0.1 dB
Gain (1 kHz, volume set to 0 dB)61 dB (MC), 41 dB (MM)
DSP Mode
Maximum Input (at 1 kHz for < 0,01% THD 20 Hz – 20 kHz)3.6 mV (MC), 38 mV (MM)
THD+N (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output)< 0.02% (MC), < 0.003% (MM)
THD (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output)0.002% (MC), < 0.0015% (MM)
SNR (IEC-A, 2 Vrms output)84 dB (MC), 102 dB (MM)
Direct Mode
Maximum Input Direct Mode (at 1 kHz for < 0,01% THD 20 Hz – 20 kHz)11.8 mV (MC), 129 mV (MM)
THD+N (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output)< 0.008% (MC), < 0.003% (MM)
THD (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output)0.002% (MC), < 0.0015% (MM)
SNR (IEC-A, 2 Vrms output)92 dB (MC), 110 dB (MM)
PREAMPLIFIER
Frequency Response
digital-in, 192 kHz10 Hz – 50 kHz (+0.00, -0.50 dB)
digital-in, 96 kHz10 Hz – 45 kHz (+0.00, -0.50 dB)
digital-in, 44.1 kHz10 Hz – 20 kHz (+0.00)
analog-in, DSP mode10 Hz – 40 kHz (+0.02, -0.20 dB)
analog-in, direct mode10 Hz – 80 kHz (+0.00, -0.10 dB)
THD+N (at 1 kHz, 20 Hz – 20 kHz BW, 2 Vrms output)
DSP Mode0.001% Digital in, 0.0016% Analog in
Analog Direct Mode0.0016%
SNR (at 1 kHz, IEC-A, 2 Vrms output)
DSP Mode113 dB (digital-in), 108 dB (analog-in)
Analog Direct Mode120 dB
Maximum Output ( <0.1% THD )
RCA connectors (direct and DSP modes)3.3 Vrms
XLR connectors (direct and DSP modes)6.6 Vrms
XLR ConfigurationPin 1: Ground, Pin 2: Normal, Pin 3: Inverted
POWER REQUIREMENT
This product operates from a single phase AC power source that supplies between 90V and 264V at a frequency of 50 or 60 Hz.
POWER CONSUMPTION
Standby0.38 W (120V), 0.45 W (240V)
Standby + Network1.1 W (120V), 1.2 W (240V)
Typical Use10 W
DIMENSIONS
Height3-8/9” (9.93 cm)
Width17” (43.2 cm)
Depth (not including power cord)14-5/6” (37.69 cm)
Weight (unpacked)16.8 lb (7.6 kg)