Descrizione
Audio-Technica AT-LP7X
Audio-Technica AT-LP7X fully manual belt-drive turntable blends analog excellence with style and versatility. For istance featuring a dense MDF plinth and acrylic platter to minimise unwanted resonance and vibration, this elegant, matte-black turntable delivers sound that’s just as clean and refined as its appearance.
The turntable comes with our AT-LT10 headshell and AT-VM95E BK (black) cartridge with 0.3 x 0.7 mil elliptical stylus, providing excellent channel separation and low distortion for outstanding tonal quality. In addition, for easy customisation, the stylus can be replaced or interchanged with other styli in the VM95 line, offering a wide choice of options for every budget and application.
Details:
The motor is mounted on vibration-dampening rubber bushings designed to decouple the motor from the plinth, minimising the transmission of mechanical noise and oscillations. Moreover an external switching power supply isolates the AC-to-DC conversion to prevent it from adding any electrical interference, and the turntable’s spring-based, height-adjustable isolation feet offer excellent protection against external noise.
Audio-Technica AT-LP7X comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover.
Specifications:
| Turntable | |
|---|---|
| Motor | DC servo motor |
| Drive Method | Belt drive |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | 20 mm (0.79″) thick acrylic platter |
| Wow and Flutter | < 0.1% (WTD) at 3 kHz (JIS) |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level | PHONO: 4.0 mV nominal at 1 kHz, 5cm/sec LINE: 252 mV nominal at 1 kHz, 5cm/sec |
| Phono Pre-Amp Gain | MM: 36 dB nominal, RIAA equalised MC: 56 dB nominal, RIAA equalised |
| Power Consumption | 5.5 W |
| Dimensions (W x D x H) | 450 × 352 × 157 mm |
| Weight | Approx. 7.6 kg |
| Operating Temperature | 5°C to 35°C |
| Accessories Included | ・Dust cover ・Platter ・Drive belt ・Counterweight ・Subcounterweight (light) ・Headshell (AT-LT10) with VM stereo cartridge (AT-VM95E BK) ・45 RPM adapter ・RCA audio cable (Approx. 1.4 m) ・AC adapter (Approx. 1.3 m) ・Gloves |
| Sold Separately | Subcounterweight (heavy) |
| Replacement Stylus | AT-VMN95E BK |
| Replacement Headshell | AT-LT10 |
| Replacement Belt | AT-LP7X exclusive belt (sold separately) |
| Tonearm | |
|---|---|
| Type | Static balanced J-shaped tonearm |
| Effective Length | 247 mm |
| Overhang | 15 mm |
| Maximum Tracking Error Angle | < 2.0° |
| Tracking force adjustment range | 0.0 – 4.0 g |
| Applicable Cartridge Weight | 14.0 to 20 g (without subcounterweight) 17.5 to 23.5 g (with subcounterweight (light)) 22.0 to 28.5 g (with subcounterweight (heavy)*)*The subcounterweight (heavy) is sold separately. |
| Cartridge | |
|---|---|
| Model | AT-VM95E BK |
| Type | VM |
| Recommended Load Impedance | 47,000 ohms |
| Output Voltage | 4.0 mV (1 kHz, 5 cm/sec) |
| Stylus Shape | 0.3 × 0.7 mil bonded elliptical stylus |
| Cantilever | Aluminium pipe |
| Tracking Force | 1.8 to 2.2 g (standard 2.0 g) |
| Weight | 6.1 g (0.22 oz) |
| AC Adapter | |
|---|---|
| Rated Input Voltage | 100 to 240 V AC |
| Rated input current | 0.6 A max. |
| Rated frequency | 50 Hz / 60 Hz |
| Rated output voltage | 12 V DC |
| Rated Secondary Current | 0.5 A |
| Cable length | Approx. 1.3 m (4.3’) |
| Headshell | |
|---|---|
| Model | AT-LT10 |
| Weight | Approx. 10.7 g (including lead wires) Approx. 10.0 g (excluding lead wires) |
| Overhang Adjustment | – 5.5 mm to + 2.5 mm (when using AT-VM95E) |
